![]() ![]() cb Calculate 16-bit BIOS image checksum for adapter. Ĭhecksum for the first kbytes of the file is calculated if is specified. įirst kbytes (except for Theater in bytes) of ROM content is saved if is specified. pa Write BIOS image to all appropriate adapters. p Write BIOS image in file to flash ROM in Adapter biosfileinfo Displays the Bios info in file ai Display advanced information of ATI adapters on system.ĭisplay advanced information of adapter i Display information of ATI adapters in the system.ĭisplay information of adapter if specified. If you are curious about all the switches the ATIFlash.exe has:įormat: ATIFLASH to choose a different card in a different slot. ![]() The switch -f means force flash, and -p 0 means flashing the card in PCI-E slot 0. You can use -p 1, -p 2, -p 3, etc. to choose different cards if you have more than one. The switch -s 0 means that you save the rom of the graphics card in PCI-E slot 0. If you are going to use the command line, make sure you run command line as Administrator. In fact, it may actually be a bit easier if you have a bunch of cards in your system. Using the Command LineĮverything you can do in the GUI, you can do from the command line. If you neglect this step, your operating system will not load the cards properly, and your system may be unstable or unusable. This will force your drivers to ignore the driver signature Windows will most likely require. Next, to flash your card with your new, enhanced BIOSĮxtract AMD/ATI Pixel Clock Patcher to your desktop and run the application.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |